![]() If the project is a multi-language project, other language translations can be added to the existing lines. The Translation File is valid for both DM1 and DM2 messages. SPNFMI 0x0b 521 0 Pedal position too high #Syntax: SPNFMI ECUAddress SPN FMI FMITranslation FMI to FMI Description (general or SPN specific)Įxample content of a translation file (for one language):.In the translation file the following translations can be made: Using a translation file can make the viewing of the trouble codes easier. When changing the CAN port you can choose to apply the settings you have made for the current CAN port. Only CAN ports that have a J1939 protocol attached are available. Select the CAN port for which you want to configure the DM settings. To open the settings dialog use the main menu tab Communication | Protocols | J1939 | DM1 / DM2 Settings.Ī description of all available settings follows here: Common Settings for DM1 and DM2 Select CAN Port We will focus on products newer than 1996, which is why only version 4 is supported. "Effective 1996, Version 4 shall be used for all future OBD applications" Please note that only conversion method 4 is used for the processing of DM1 messages. Tutorial video about setting up J1939 DM1 / DM2įor receiving and displaying the contents of DM1 and DM2 messages various settings can be made. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
May 2023
Categories |